sm107 sm106 sm105 sm104 sm103 sm102 SM101 SM101 - sm107 current: 1.0a =100 c 15 100.0 5.0 1.3 30.0 1.0 suface mount fast recovery rectifier diodes voltage range: 50 - 1000v glass passivated device ideal for surface mouted applications metallurgically bonded construction high temperature soldering guaranteed: 250 c/10 seconds,0.375 ? (9.5mm) lead length, 5 lbs. (2.3kg) tension low reverse leakage features mechanical data ! ! ! ! ! ! a m pf c ns 700 1000 v rrm v rms v dc i (av) i fsm v f maximum repetitive peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward rectified current at t a =65 c (note 1) peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) maximum instantaneous forward voltage at 1.0a maximum dc reverse current t a =25 c at rated dc blocking voltage t a i r t l =25 c maximum reverse recovery time (note 2) typical junction capacitance (note 3) c j operating junction and storage temperature range t j , t stg -50 to +150 500 trr 70 100 280 400 140 200 420 600 560 800 35 50 150 250 50 100 200 400 600 800 1000 maximum ratings and electrical characteristics t a = 25 c unless otherwise specified single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. note: 180 k/w 3.measured at 1mhz and applied reverse voltage of 4.0v d.c. 1.averaged over any 20ms period. 2.measured with if=0.5a, ir=1a, irr=0.25a. 4.thermal resistance junction to ambient, 6.0 mm2 coppeer pads to each terminal. typical thermal resistance (note 4) r q ja characteristic symbol unit 1 of 2 www.sunmate.tw v v v a a v dim min max ll41 /do-213ab a 4.80 5.20 b 2.40 2.60 c 0.55 nominal all dimensions in mm c a b / case: ll41(do-213ab), plastic terminals: solderable per mil-std-202, method 208 polarity: cathode band approx weight: 0.25 grams mounting position: any marking: cathode band only ! ! ! ! !
ratings and characteristic curves SM101 thru sm107 1.0 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 175 30 25 20 15 10 5.0 0.6 0.8 1.0 1.2 1.4 1.5 0.1 1.0 10 100 0.01 0.1 1 10 100 100 10 1 0.1 reverse voltage,volts t,pulse duration,sec. fig. 5-typical junction capacitance fig. 6-typical transient thermal impedance fig. 3-typical instantaneous forward characteristics number of cycles at 60 hz fig. 2-maximum non-repetitive peak forward surge current fig. 1- forward current derating curve average forward rectified current, amperes instantaneous forward current,amperes junction capacitance, pf peak forward surge current, amperes instantaneous forward voleage, volts single phase half wave 60hz resistive or inductive load 1 10 100 8.3ms single half sine-wave (jedec method) 0.01 0.1 1 20 10 t j =25 c pulse width=300 m s 1%duty cycle t j =25 c 1 10 100 200 0 20 40 60 80 100 1,000 100 10 1 0.1 0.01 tj=100 c tj=25 c percent of peak reverse voltage,% fig. 4-typical reverse characteristics instantaneous reverse current, microamperes transient thermal impedance, c/w ambient temperature, c 2 of 2 www.sunmate.tw
|
